A bonded system is a very easy-to-install solution used to enhance a tired-looking area.
It’s a 2-part polyurethane resin which is applied to the surface using a squeegee at 3mm. A small aggregate, usually 1-3mm in size is cast over the entire surface.
The resin cures and the stones are bonded to it. The loose aggregate is swept up and the result is a stunning new look, breathing new life into an existing area. It’s usually applied to either existing tarmac or concrete. The system is not permeable and incredibly slip resistant. Installation is a breeze with very few required tools (paddle whisk, bucket, and squeegee) and requires little to no skill.
A 17.5kgs kit will give a coverage of 10m2 and will require 4 x 25kgs bags of 1-3mm aggregate. It’s a very low-cost system that offers many benefits and is quick and easy. If applied to concrete a polyurethane primer must be used.
PolyBound sell bonded kits, a full range of decorative aggregates, primer and all the required tools and ancillaries – call now on 01274 044 199.